Used Equipment

Dilution Skid – Continuous Processing Pilot Plant

The system consist of two separate skids, and each skid has all necessary equipment, piping and valves as pictured. All equipment is mounted a on stainless steel bases, except for the control panel, which is designed forlocated in a non-hazardous area (in the event explosion proof requirements must be met).Used-Dillution-Plant-Continuous-Processing

The skids can be stacked, or can be mounted separately. Manual isolation valves are located at the points of entry. Accurate control of the flow rates is accomplished with positive displacement pumps and flow meters that are located on each stream of liquid. Check valves are located at the end of each incoming stream in order to prevent backflow and any siphoning effects. The streams are combined immediately before the high shear zone of the IKA mixers with a specially designed injection tubes. Each skid has the electrical equipment wired to a junction box for easy field installation. Read more…


Vertical Electric Thermal Fluid Heater

Electric-Thermal-Fluid-HeaterFulton’s Vertical Electric thermal fluid heater features top mounted multiple low watt density elements that allow for a thermal efficiency of 96%.This a 230/460 volt system that has a heating range of up to 650 F and will circulate the thermal fluid at a rate of 50gpm.

This is a complete skid mounted unit that comes with all the pipe-work connections for the system and a customized control cabinet set up and ready to run your process. Read more…



LABOR-PILOT 2000/4

Motor 3hp (2.2kw) IEC
Rated EE de 11C T4
2:1 inverter duty

labor-pilot(Module option: UTL, DR, MHD, MK)

Flow rate (water @ 70F) one stage at 7900 rpm:
2C/4M/6F = 1.5 gpm (350 l/h)
2P = 4 gpm (3500 l/h)
MHD = 1.25 gpm (300 l/h)
MK = 0.5 gpm (100 l/h)
Solids Inlet/Liquid Inlet/Outlet: 2″/1″/0.75″
Generators Available: 2P, 2G, 4M, 6F, 8SF
Tip Speed: 4645 fpm (23.6 m/s)
Weight, approximate: 75 lb (80 kg)


PROCESS-PILOT 2000/4

Process Pilot

Motor 3hp (2.2kw) IEC
Rated EE de 11C T4
2:1 inverter duty

INCLUDES DOUBLE MECHANICAL SEAL WITH SUPPLY SYSTEM

(Module option: UTL, DR, MHD, MK)

Flow rate (water @ 70F) one stage at 7900 rpm:
2C/4M/6F = 1.5 gpm (350 l/h)
2P = 4 gpm (3500 l/h)
MHD = 1.25 gpm (300 l/h)
MK = 0.5 gpm (100 l/h)
Solids Inlet/Liquid Inlet/Outlet: 2″/1″/0.75″
Generators Available: 2P, 2G, 4M, 6F, 8SF
Tip Speed: 4645 fpm (23.6 m/s)
Weight, approximate: 75 lb (80 kg)


UTC 115 KD Ultra-Turrax Batch Mixer

utc2This UTC is available as a KD version designed for operation for closed vessels. The rotating shaft is sealed with a mechanical KD seal. Nominal capacity is 130 gallons (500 liters). Dispersing tool options are available.

Motor is a 10hp reliance 230/460/3/60 explosion proof. Nominal speed at 60 hz is 3600 rpm with tip speed of 18 m/s.

utc1

Used Equipment

Hotline

If you have any further questions regarding our products and services, our team of advisers will be happy to help:
+1 910 452 7059