Mixing Head Kits
(all mixing head kits come with a FPM o-ring set and 316 stainless steel components)

Dispax Reactor Module  P/N R078352
Converts basic unit to a three stage dispersing machine:
Three-stage high shear dispersing module, Dispax Reactor® (DR).  Three generators (Coarse-Medium-Fine) are arranged in series for optimum performance and functionality.  Additional generators can be interchanged to  create a wide variety of configurations (see list of available generators below in “Accessories”), maximum flow rate of the 2G, 4M and 6F generators is  0.6 gpm, the conversion kit consists of two generator, 2G coarse and 6F fine(rotor & stator).

MHD Module, Solid-Liquid Disperser with mechanical feed    P/N R075262
Converts basic unit to a solid-liquid dispersing machine:
Powder-liquid dispersing module, with a patented design, that feeds and disperses powders into liquids in one step.  The MHD’s unique design mechanically feeds in the powders, eliminating the excessive aeration that results from machines that suction in the powders.  The first stage feeds in the powders, and then the liquid is injected and blended in the second stage, the third stage contains a rotor and stator that can be easily interchanged for the application.  The generator included in the kit is the high flow 2P.

CMS Module, Solid-Liquid Blender with suction  P/N R075333
Converts basic unit to a suction feed, solid-liquid blender:
The CMSÒ, which feeds by vacuum and disperses powders into liquids in one step.  The CMS feeds in the powders by a strong vacuum, which can eliminate the need for an auxiliary feeding device.

MK Colloid Mill  P/N R076662
Converts basic unit to a adjustable gap colloid mill:
The MK Colloid mill is equipped with an adjustable milling tool, that is used for wet milling hard pigments and other solids with Moh’s hardness up to about 8.  The milling tool has three stages of spirals that progress in finess, for superior emulsifying and particle size reduction.

MKO Cone Mill  P/N R079664
Converts basic unit to a adjustable gap cone mill:
Cone mill with and adjustable milling tool that is used for wet milling hard pigments and other solids with Moh’s hardness exceeding 8. The milling tool has two stages, first stage is spiral toothed for pre-milling coarse particulates, and the second stage has tungsten carbide surface for fine wet milling.

ULTRA-TURRAX® UTC Batch Disperser Module  P/N R079766
Converts basic unit to a batch disperser:
The UTC-module consists of an adapter and the dispersing tool (S25N-18G).  For batch operation the magic LAB® is equipped with the UTC-module and turned upside down. Includes