Single Stage Inline Dispersers
The UTL is a single stage dispersing machine used for the production of emulsions and suspensions requiring a coarse to medium particle size with a narrow distribution. A wide variety of rotors-stator combinations (generators) are available for adapting

The UTL maintains a constant tip speed, no matter what the machine size, ensuring scalability. A wide range of options is available on the motor, base, materials of construction, and more. The ULTRA-TURRAX has high quality surface finishes for easy cleaning, and the machine is self-draining and CIP capable.

Multiple Stage Inline Dispersers
The DISPAX REACTOR is a high shear, three stage dispersing machine for the production of micro-emulsions and very fine suspensions. Three rotor-stator combinations (generators) in a series produce a small droplet or particle size, with a very narrow distribution. The generators can be easily interchanged, offering the ultimate in flexibility. The DR line offers the same advantages as the UTL for scalability and sanitary design, and is CIP and SIP capable.

Colloid Mills
The colloid mill MK 2000 is especially designed for the production of colloidal solutions, or extremely fine emulsions and suspensions. The high tip speeds, combined with an extremely small shear gap, produces intense friction on the material being processed. The friction and shear that result is commonly referred to as wet milling. The rotor and stator are cone shaped, and have three stages of increasingly fine serrations, or grooves. The stator can be infinitely adjusted to obtain the desired gap setting between the rotor and stator. The grooves change directions in each stage for increased turbulence. With high quality finishes and materials, the MK tool offers an extremely efficient milling geometry.

Cone Mills
Another unique IKA Innovation, the cone mill MKO 2000 was designed to extend beyond the capabilities of the colloid mill. Due to it’s innovative design, it is capable of wet milling and grinding, producing even smaller particle sizes than a colloid mill. Themilling gap is infinitely adjustable so that exact amount of milling action can be obtained.

Powder/Liquid Mixing
When production quantities require a continuous process, the MHD 2000 can get the job done. Solids and liquids are instantaneously mixed and dispersed in one step, maintaining a dust free environment. The MHD accurately combines the solid and liquid, and disperses them into a homogeneous, final product. Tanks and other auxiliary equipment can often be eliminated, saving capital and operating expenses. The MHD has a unique, patented design that doesn't’t require suction to draw in the powders, which essentially eliminates aeration.

Laboratory Scale Powder/Liquid mixing System
Continuous production requires continuous feeding. IKA can provide a complete turnkey system, including bulk bag unloaders and other powder or liquid processing equipment. IKA engineers can design a complete system and controls according to your application requirements. Machines can be provided form laboratory to production scale.

Powder incorporation and semi-continuous process
Incorporating powders into liquids, without lumps and without dust, is an important part of many processes. The CMS 2000 utilizes a specially designed rotor that creates enormous suction to draw in solids, while it pumps the liquid at the same time. The liquid can then be re-circulated until all powders are incorporated. Even difficult to wet out solids can be incorporated at high flow rates. In some cases, solids concentrations of up to 80% can be achie ved! Additional dispersing can be accomplished by continually re-circulating without adding more powder.

Master

DPv

Dispersing System

Vertical Kneader

Lab

T50 Basic

ULTRA TURRAX T50 Basic
High-performance dispersing instrument.
• Volume range: 0.25-30 liters
• Wide selection of
interchangeable dispersing tools
• 700 Watts and Integrated control ensure constant
speed, even with changes in
viscosity

T25-T18

High Shear Batch Mixers - top entry
For batch mixing operations, these machines are available in three construction series. All machines distinguish them selves by their simple, sturdy construction.

The UTC can be installed a closed container or suspended in a closed container with all stainless steel parts contacting the product.

UTS/KT
For batch mixing operations, these machines are available in three construction series. All machines distinguish them selves by their simple, sturdy construction.

The UTS can be installed a closed container or suspended in a closed container with all stainless steel parts contacting the product.

UTS/KT

UTE

Jet Mixer IKA-ROTOTRON
Effective jet flow agitation for low shear high speed mixing. It can be used for high viscosity’s and large volumes from 26 gal. up to about 8000 gal.

Mobile stand with hydraulic hand pump
A complete line of mixer stands is available for all IKA batch mixers. Lifting and lowering can be done with either a manual hydraulic pump, or an electro-hydraulic pump for automatic operation. The mixer stands can be floor mounted, wall mounted or mobile. They may also be equipped with a swivel bracket for angle adjustment of the mixer. An optional vessel clamp is also available. Other options are available, including materials of construction and electrical controls. The lifting height of the stand can be specified according to the requirements. Stainless steel versions with high quality surface finishes are available for the food and pharmaceutical industries.

Modified Asphalt Emulsion
IKA manufactures High Shear Mixing Asphalt Mills, and Homogenizing Equipment for modified Bitumen and modified polymer asphalt emulsions. The IKA Dispax Reactor High shear Mill can be used in recirculation or during pump-out in conjunction with vessel for Asphalt modified or Asphalt emulsions. Additionally, IKA offers a Dispax PMB mill that can wet-out and homogenize the SBS or EVA polymer directly into the bitumen or Asphalt emulsion phase without the requirement of a pre-mix asphalt vessel. IKA offers stand alone equipment or Asphalt Mill, Emulsion plant or turnkey system. Equipment is offered with Abrasion resistant tooling, suitable for 200 degree C, up to 250 HP or larger motor. Small pilot scale and Large Production scale Mills and systems are offered.