|
|
|
Bomb
Calorimeter C 2000 Basic |
Bomb
Calorimeter C 2000 Control |
|
|
| |
|
The
bomb calorimeter C 2000 basic / control is the latest
system from IKA ® for determining gross calorific
values of liquids and solid fuels. During the development
of this bomb calorimeter, great importance was placed
on user-friendliness and on simple and fast maintenance.
A higher level of automation with extremely simple
handling characterizes this device. In addition to
the isoperibolic measurement procedure, a dynamic
(reduced-time) working method is also available for
the user. Different working temperatures can be selected
for both procedures based on the conditions of the
experiment.
Both the device technology and the measurement procedure
are approved by DIN 51900, ASTM 240D, ISO 1928 and
BSI. In combination with special halogen-resistant
decomposition vessels of the C 5012 series, quantitative
decompositions can be performed in parallel to the
analysis of gross calorific value to determine halogen
and sulfur content.
To provide a supply of cooling water, the C 2000 bomb
calorimeter is connected with a standard commercially
available thermostat or with an appropriate permanently
installed water connection.
The C 2000 basic bomb calorimeters are equipped with
a very convenient operating panel through which operation
of the device takes place. The graphical display with
active back lighting displays the appropriate status
messages. The temporal course of a measurement that
has been started and all current parameters of the
weighed in sample can be con-stantly monitored and
are arranged to be clearly visible.
The C 2000 bomb calorimeter control variant is delivered
from the factory already complete with the well-known
and proven C 5040 Calwin calorimeter software. Control
of the system takes place via a PC or Notebook that
is connected with the C 2000 calorimeter via a serial
interface. The required interface cable is included
with delivery (PC or notebook are not included in
the delivery package).
Library functions and various correction modes make
it possible to call up measure-ments that have already
been performed at any time and to edit post-experiment
pa-rameters. The C 2000 basic / control calorimeter
is equipped with a separate service menu that allows
for fast access to individual maintenance functions
and testing of basic system data. Connections for
analysis scale, printer, sample rack for identifying
and managing samples are already integrated into the
basic device.
The network connection and the special configuration
for data exchange can be im-plemented at any time
with LIMS.
The individual functions:
 Device
approval according to DIN 51900, ASTM 240D, ISO 1928,
BSI etc.
Compact,
integrated modular design
Working
method: isoperibolic, dynamic
Working
temperature 25 °C or 30 °C (adjustable)
Automatic
filling of decomposition vessel with oxygen
Cooling
water supply via water supply line / thermostat
(thermostat
see accessories)
Interfaces
for scale and printer
Interfaces
for PC keyboard and monitor
Interface
for connecting th C 5020 sample rack (sample management
system)
User-friendly
and menu-driven software
Special
decomposition vessel for halogen and sulfur analysis
is avaiable
Can
be controlled via Calwin for Windows calorimeter software
( accessory for Basic version and C 2000 extended
device)
If
a multiple interface card is used, as many as eight
measuring cells can be
controlled by a single PC (Multical).
|
|
